How to Install a Reusable Nano Adhesive Tape

While it is very easy to install a Reusable Nano Adhesive Tape, a lot of things can go wrong such as the tape not adhering properly to the surface or the tape losing its adhering power after quite some time.

To make sure that your Nano Adhesive Tape will perform really well for its purposes, here are some tips that could help you out:

Clean both surfaces where you would be installing the Nano Adhesive Tape. Lint, dirt, and dust can significantly lessen the bonding strength of adhesives.
Peel the tape from the roll. Do not cut a strip first.
Apply the tape on the surface with the other end of the tape still spooled on the roll.
Cut the tape, making sure that you apply tension on the strip by partially pulling the roll. The tension will make it easier to cut.
Important: Remove the adhesive liner. To separate the adhesive liner easily, you can use any flat tipped object like a card, knife’s edge or your fingernail to create an initial gap between the liner and the tape.
Apply more strips by repeating

Cleaning and Repositioning
A Nano Adhesive Tape is reusable, repositionable, and you can clean it easily.

To reuse the tape, simply wash it under running water. Remove any dirt, dust, and grime that has accumulated over time. When reapplying, do not touch the adhesive side too much as oils from our hands can reduce the adhesive strength.

Improving Bonding Strength
Here are some tips on how to improve the bonding strength of your Nano Adhesive Tape:

You can increase the bonding strength of the reusable Nano Adhesive Tape by pressing it towards the surface. Make sure to press it firmly through your hands or palm. Squeegee any air bubbles or gaps that may exist between the surface and the tape.
If you have a hair dryer or a heat gun, you can also heat the adhesive using warm air exhaust. Heating the adhesive upon installation will temper it and further increase the adhesive’s strength.
Increasing the surface area of application by applying more strips on the object that is to be mounted will also increase the weight holding capacity.