Carpet Anti-slip helps to prevent accidents. This tape offers safe working and walking by when applied on stairs and walkways, both indoors and outdoors. It has a mineral-coated plastic film with a pressure-sensitive adhesive protected by a removable liner. The tape is made using aluminum oxide mineral particles and has a solvent acrylic adhesive material. Furthermore, the tape can be applied at a temperature between 5 °C and 50 °C.
The Carpet Anti-slip is an effective and cost-efficient way to enhance safety and prevent slip-and-fall accidents in both maritime and commercial environments. It provides peace of mind by reducing the risk of injuries associated with slippery surfaces.
Carpet Anti-slip tape offers excellent grip in foot traffic areas, including floor,bed room,hall stairs, steps, shop fronts, vehicles, machinery and floors etc that are likely to get contaminated with water. Anti slip tape is easily cut to size using scissors or a sharp Knife.
Anti-slip tape is a type of adhesive tape specifically designed to reduce the risk of slips, trips, and falls on surfaces that may be slippery. It is commonly used to enhance safety by providing traction and grip on floors, stairs, ramps, and other surfaces. It is especially valuable in areas prone to moisture or where spills are likely to occur, such as manufacturing facilities.
semi transparent anti slip tape
Allows the subfloor colour to show through
Reduces the risk of slip accidents
Use indoors or outdoors
Use almost anywhere extra grip is required
Very cost effective slip prevention solution
Easy to cut to size using a scissors or a knife
Self adhesive for fast and easy application
Manufactured in the China to the highest quality standards
Helps your business meet DDA and other safety regulations
Increase the lifespan of your anti slip tapes by using Edge Seal Adhesive
How to Use The Carpet Anti-Slip Tape step by step?
Step 1: Clean the back of the carpet
Before using carpet tape, make sure the back of the carpet is free of dust to ensure the best results.
Step 2: Cut the carpet tape
Turn the carpet upside down with the back side facing us and cut the right length of carpet tape to suit the size of the edge of the carpet.
Step 3: Apply
Remove the release paper from the back of the tape and place the adhesive side on the back of the carpet, with the non-adhesive side facing the floor.
Step 4: Pressing
After the tape has been applied, press the surface of the tape with your hand to make a tighter fit between the glue and the carpet, for better results.
Step 5: Tape all four sides
Repeat the above 3 steps to apply non-slip tape to all edges of the carpet, then turn the carpet over and use it directly.
评论
发表评论